Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
14.
REMOVE OIL SEAL (OUTSIDE)
Using a screwdriver, remove the oil seal (outside) from the steering knuckle.
15.
REMOVE BEARING FROM STEERING KNUCKLE
A.
Using snap ring pliers, remove the snap ring.
B.
Using the following SSTs and a press, remove the bearing from the steering knuckle.
^
09950-60020 (09951-00810)
^
09950-70010 (09951-07150)
16.
INSTALL NEW BEARING
A.
Using the following SSTs and a press, install a NEW bearing to the steering knuckle.
^
09527-17011
^
09950-60020 (09951-00910)
B.
Using Snap ring pliers, install a NEW snap ring.
17.
INSTALL NEW OIL SEAL (OUTSIDE)
A.
Using the following SSTs and a plastic hammer, install a NEW oil seal (outside).
^
09223-15030