Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
A.
Using snap ring pliers, remove the snap ring.
B.
Using the following SSTs and a press, remove the bearing from the steering knuckle.
SST P/N: 09950-60020
(09951-00810)
SST P/N: 09950-70010
(09951-07150)
16.
Install new bearing.
A.
Using the following SSTs and a press, install a NEW bearing to the steering knuckle.
SST P/N:
09527-17011
SST P/N:
09950-60020
(09951-00910)
B.
Using snap ring pliers, install a NEW snap ring.
17.
Install new oil seal (outside).
A.
Using the following SSTs and a plastic hammer, install a NEW oil seal (outside).
SST P/N:
09223-15030