Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
8. REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator assembly.
9. REMOVE NO.1 FAN SHROUD
Remove the 4 bolts and No.1 fan shroud.
DISASSEMBLY
1. REMOVE RADIATOR SUPPORTS
Remove the 4 bolts, 2 pipes, 2 bushings and 2 radiator supports.
2. REMOVE RADIATOR CAP
3. REMOVE DRAIN PLUG
4. ASSEMBLE SST
SST 09230-01010
a. Install the claw to the overhaul handle, inserting it in the hole in part "A" as shown in the diagram.
b. While gripping the handle, adjust the stopper bolt so that dimension "B" shown in the diagram is 0.2 - 0.3 mm (0.008 - 0.012 inch).
NOTICE: If this adjustment is not done, the claw may be damaged.
5. UNCAULK LOCK PLATES
Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.
SST 09230-01010
6. REMOVE TANKS AND O-RINGS
a. Lightly tap the radiator port (inlet or outlet) with a soft faced hammer, and remove the tank.