Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
Temperature Gauge: All Technical Service Bulletins
Instruments - Coolant Temperature Gauge Inaccurate
ELECTRICAL
EL009-01
October 12, 2001
Title:
TEMPERATURE GAUGE INACCURATE
Models:
'00 - '01 Tundra
Introduction
Some 2000 - 2001 model year Tundra trucks may experience a condition in which the engine coolant temperature gauge displays an abnormally high
reading during normal engine operating temperatures. To address this condition, an updated Temperature Gauge has been made available.
Applicable Vehicles
^
2000 - 2001 model year Tundra trucks, built prior to the VIN shown.
Production Change Information
Parts Information
Repair Procedure
IMPORTANT:
Verify that the engine is operating at a normal temperature with the Scan Tool before replacing the temperature gauge.
1.
Remove the four bolts securing the combination meter assembly.
2.
Replace the Temperature Gauge.
3.
Reassemble the combination meter.
Warranty Information
Applicable Warranty *:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.
* Warranty application is limited to correction of a problem based upon a customer's specific complaint.