Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
/Page-684001.png)
Camshaft Position Sensor: Testing and Inspection
INSPECTION CAMSHAFT POSITION SENSOR
a. Disconnect the camshaft position sensor connectors.
b. Inspect the camshaft position sensor resistance.
Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold 835 - 1,400 Ohms
Hot 1,060 - 1,645 Ohms
If the resistance is not as specified, replace the camshaft position sensor.
c. Reconnect the camshaft position sensor connector.