Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
REPAIRS AND INSPECTIONS REQUIRED AFTER A COLLISION
FRONT PASSENGER AIRBAG ASSEMBLY
1. VEHICLES NOT INVOLVED IN COLLISION
a. Do a diagnostic system check
b. Do a visual check which includes the following items with the front passenger airbag assembly installed in the vehicle.
Check cuts, minute cracks or marked discoloration on the front passenger airbag assembly and instrument panel.
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the front passenger airbag assembly removed from the vehicle.
-
Check cuts, minute cracks or marked discoloration on the front passenger airbag assembly.
-
Check cuts and cracks in wire harnesses, and for chipping in connectors.
-
Check the deformation or cracks on the instrument panel and instrument panel reinforcement.
HINT:
-
If the instrument panel or instrument panel reinforcement is deformed or cracked, never repair it. Always replace it with a new one.