Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
/Page-1035006.png)
c. Place the bearing cover (inside) on the rotor.
d. Using SST and a press, press in a new bearing.
SST 09820-00030
e. Using SST, push in the bearing cover (outside).
SST 09285-76010
REASSEMBLY
1. PLACE RECTIFIER END FRAME ON PULLEY
2. INSTALL ROTOR TO DRIVE END FRAME
3. INSTALL RECTIFIER END FRAME