Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
Steering Wheel: Service and Repair
Air Bag - Deployment and Disposal
Deployment When Disposing of Steering Wheel Pad Only
DISPOSAL
HINT: When scrapping vehicle equipped with an SRS or disposing of a steering wheel pad (with airbag), always first deploy the air-bag in accordance
with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT of TOYOTA MOTOR SALES,
U.S.A., INC.
CAUTION:
-
Never dispose of a steering wheel pad which has an undeployed airbag.
-
The airbag produces a sizeable exploding sound when it deploys, so perform the operation out-of-doors and where it will not create a nuisance to
nearby residents.
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool) Perform the operation in a place away from electrical
noise.
SST 09082-00700
-
When deploying an airbag, perform the operation at least 10 m (33 ft) away from the steering wheel pad.
-
The steering wheel pad is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a steering wheel pad with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a steering wheel pad with the deployed airbag.
DEPLOYMENT WHEN DISPOSING OF STEERING WHEEL PAD ONLY
NOTE:
-
When disposing of the steering wheel pad (with air-bag) only, never use the customers vehicle to deploy the airbag.
-
Be sure to follow the procedure given below when deploying the airbag.
HINT: Have a battery ready as the power source to deploy the airbag.
a. Remove the steering wheel pad.
CAUTION:
-
When removing the steering wheel pad, work must be started 90 seconds after the ignition switch is turned to the "LOCK" position and the
negative (-) terminal cable is disconnected from the battery.
-
When storing the steering wheel pad, keep the upper surface of the pad facing upward.
b. Remove the connector on the steering wheel pad rear surface.