Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
Stabilizer Bar: Service and Repair
REMOVAL
1. DISCONNECT STABILIZER BAR LINKS
Remove the 2 nuts and disconnect the stabilizer bar links from the lower suspension arms.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
2. REMOVE STABILIZER BAR
a. Remove the 2 bolts, nuts and stabilizer bar with the cushions and brackets.
b. Remove the 2 brackets and cushions from the stabilizer bar.