Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
3. 4WD: DISCONNECT DRIVE SHAFT
a. Remove the cotter pin and lock cap.
b. While applying the brakes, remove the lock nut.
4. w/ ABS: DISCONNECT ABS SPEED SENSOR AND WIRE HARNESS CLAMP FROM STEERING KNUCKLE
Remove the 2 bolts and disconnect the ABS speed sensor and wire harness clamp from the steering knuckle.
5. REMOVE BRAKE CALIPER AND DISC
a. Remove the bolt and brake line clamp from the steering knuckle.
b. Remove the 2 bolts, brake caliper and disc.
NOTICE: Do not damage the brake tube.
c. Support the brake caliper securely.
6. REMOVE SHOCK ABSORBER
7. DISCONNECT LOWER BALL JOINT
Remove the 4 bolts and disconnect the lower ball joint.