Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
/Page-1643006.png)
a. Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT: After cutting off the tip, use all adhesive within the time described in the table.
b. Load the cartridge into the sealer gun.
c. Coat the glass with adhesive as shown in the illustration.
A: 8.0 mm (0.314 in.)
B: 12.0 mm (0.472 in.)
8. INSTALL BACK WINDOW GLASS
a. Position the glass so that the reference marks are lined up, and press in gently along the rim.
b. Using a spatula, apply adhesive on the glass rim.
c. Use a scraper to remove any excess or protruding adhesive.
HINT: Confirm that the moulding is attached to the body panel as shown in the illustration.