Tundra Access Cab SR5 2WD V8-4.7L (2UZ-FE) (2001)
Install the 2 radiator supports, 2 bushings and 2 pipes with the 4 bolts.
Torque: 12.7 Nm (130 kgf-cm, 9 ft. lbs.)
8. INSTALL RADIATOR CAP
INSTALLATION
1. INSTALL NO.1 FAN SHROUD
Install the No.1 fan shroud with the 4 bolts
Torque: 5 Nm (50 kgf-cm, 44 inch lbs.)
2. INSTALL RADIATOR ASSEMBLY
a. Set the radiator bracket hooks to the radiator support holes.
b. Install the 4 bolts.
Torque: 12 Nm (120 Nm, 9 ft. lbs.)
3. INSTALL NO.2 FAN SHROUD
Install the No.2 fan shroud with the 2 clips.
4. CONNECT A/T OIL COOLER HOSES TO RADIATOR
5. CONNECT UPPER RADIATOR HOSE TO RADIATOR
6. CONNECT LOWER RADIATOR HOSE TO RADIATOR
7. CONNECT RADIATOR RESERVOIR HOSE TO RADIATOR
8. FILL WITH ENGINE COOLANT
9. START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS
10. RECHECK ENGINE COOLANT LEVEL
11. INSTALL ENGINE UNDER COVER