Tundra Access Cab SR5 2WD V8-4.7L (2UZ-FE) (2001)
![background image](/toyota/tundra_access_cab_sr5_2wd/v8-4.7l_(2uz-fe)/Page-588002.png)
If operation is not as specified, replace the MAF meter.
6. Turn the ignition switch OFF.
7. Disconnect the negative (-) terminal cable from the battery.
8. Disconnect the MAF meter connector.
4. REINSTALL MAF METER
Install the MAF meter with the 2 screws.
5. RECONNECT MAF METER CONNECTOR