Tundra Access Cab SR5 2WD V8-4.7L (2UZ-FE) (2001)
/Page-1336001.png)
Clockspring Assembly / Spiral Cable: Testing and Inspection
Collision / Non-Collision Inspections
VEHICLE NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.
See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes
b. Do a visual check which includes the following item with the steering wheel pad (with airbag) installed in the vehicle.
Check cuts, minute cracks or marked discoloration on the steering wheel pad top surface and in the grooved portion.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Do a diagnostic system check.
See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes
b. Do a visual check which includes the following items with the steering wheel pad (with airbag) removed from the vehicle.
-
Check cuts, minute cracks or marked discoloration on the steering wheel pad top surface and in the grooved portion.
-
Check cuts and cracks in wire harnesses, and chipping in connectors.
-
Check the deformation of the horn button contact plate on the steering wheel pad.
HINT:
-
If the horn button contact plate of the steering wheel pad is deformed, never repair it. Always replace the steering wheel pad with a new one.