Tundra Regular Cab 2WD V6-3.4L (5VZ-FE) (2000)
4. REMOVE OIL STRAINER
NOTICE: Be careful as some fluid will come out of the oil strainer.
a. Separate the solenoid wire.
b. Remove the 4 bolts, oil strainer and 3 gaskets.
5. REMOVE OIL PIPE
a. A340E: Pry up both pipe ends with a large screwdriver and remove the 2 pipes.
b. A340F: Pry up both pipe ends with a large screwdriver and remove the pipe.
6. DISCONNECT 3 CONNECTORS FROM EACH SHIFT SOLENOID VALVE
7. REMOVE VALVE BODY