Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
/Page-1080001.png)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
DISASSEMBLY
1. REMOVE RESERVOIR
a. Remove the set screw and pull out the reservoir.
Torque: 1.8 Nm (18 kgf-cm, 16 inch lbs.)
b. Remove the cap and strainer from the reservoir.
2. REMOVE 2 GROMMETS
3. PLACE CYLINDER IN VISE
