Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
/Page-1261002.png)
a. Disconnect the 2 connectors.
b. Remove the circuit.
5. REMOVE LENS
Release the 3 claws, then remove the lens.
REASSEMBLY
1. INSTALL LENS
Install the lens.
2. INSTALL INTEGRATION CIRCUIT
a. Connect the 2 connectors.
b. Install the circuit.
3. INSTALL HEATER CONTROL HOUSING
a. Connect the connector
b. Install the heater control housing.
