Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
Back Window Glass: Service and Repair
REMOVAL
HINT: For step 2 to 10, refer to Headliner.
1. Access cab:
REMOVE REAR SEAT
2. Standard cab:
REMOVE FRONT DOOR SCUFF PLATES
3. Access cab:
REMOVE ACCESS DOOR SCUFF PLATES
4. REMOVE ASSIST GRIPS
5. Standard cab:
REMOVE FRONT PILLAR GARNISHES
6. Access cab:
REMOVE ROOF SIDE RAIL GARNISHES
7. REMOVE ROOM LIGHT
8. Standard cab:
REMOVE COAT HOOK
9. Standard cab:
REMOVE BACK PANEL UPPER GARNISH
10. REMOVE QUARTER TRIMS
11. REMOVE REAR PART OF ROOF HEADLINING
a. Standard cab:
Remove the 2 clips and rear part of the roof headlining.
b. Access cab:
Remove the 3 clips and rear part of the roof headlining.
12. REMOVE BACK WINDOW GLASS
a. Remove the 4 nuts.
b. Using a screwdriver, loosen the weatherstrip from the body.
NOTE: Be careful not to damage the body paint.
HINT: Tape the screwdriver tip before use.