toyota Workshop Repair Guides

Toyota Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Cruise Control Switch: Service and Repair
Removal/Installation

1.

Disconnect battery ground cable.

2.

Remove horn button screws and horn button.

3.

Scribe alignment marks on steering wheel and steering shaft.

4.

Remove steering wheel nut.

5.

Using a steering wheel puller, remove steering wheel.

6.

Remove steering column upper and lower covers.

7.

Disconnect switch connectors, remove screws and combination switch.

8.

Reverse procedure to install.

Cruise Control > Sensors and Switches - Cruise Control > Cruise Control Switch > Component Information > Service and Repair > Removal/Installation

< PREV PAGE NEXT PAGE >