Venza AWD L4-2.7L (1AR-FE) (2009)
(e) Install the tail exhaust pipe assembly with the 2 bolts and 2 compression springs.
Torque: 43 Nm (438 kgf-cm, 32ft-lbf)
4. INSTALL TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY
(a) Align the concave on each baffle with each protruding part of the tail exhaust pipe assembly as shown in the illustration.
Text in Illustration
(b) Using a plastic hammer, uniformly tap the tail exhaust pipe baffle sub-assembly onto the tail exhaust pipe assembly.
5. INSTALL HEATED OXYGEN SENSOR
(a) Install the heated oxygen sensor See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and Repair/Heated
Oxygen Sensor/Installation.
6. INSPECT FOR EXHAUST GAS LEAK