toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Seat Occupant Sensor > < Front Airbag Sensor|Page 7175
Page 4
background image

5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Installation

6. INSTALL REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Installation

8. INSTALL FRONT DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:  When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Repair Instruction - Initialization.

10. PERFORM DIAGNOSTIC SYSTEM CHECK

(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check

/ Clear.

11. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.

Seat Occupant Sensor > < Front Airbag Sensor|Page 7175