Venza AWD V6-3.5L (2GR-FE) (2010)
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
3. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL See: Body and
Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
5. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
6. REMOVE REAR SPEAKER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts and rear speaker assembly.
7. REMOVE REAR SPEAKER BRACKET (for 13 Speakers)
(a) Remove the 8 screws, rear speaker bracket and rear door speaker grille sub-assembly.
8. REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 13 Speakers)
(a) Remove the 2 screws.
(b) Disengage the clamp and remove the rear No. 2 speaker assembly.
Installation
AUDIO / VIDEO: REAR DOOR SPEAKER: INSTALLATION
1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 13 Speakers)