Venza AWD V6-3.5L (2GR-FE) (2010)
(c) Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
(d) Raise the front door trim board sub-assembly and remove the front door trim board sub-assembly together with the front door inner glass
weatherstrip.
(e) Disengage the 2 claws and disconnect the front door inside handle sub-assembly.
7. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY
(a) Disconnect the front door lock remote control cable and front door inside locking cable, and remove the front door inside handle
sub-assembly.
8. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP
(a) Disengage the 8 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the
illustration.
9. REMOVE DOOR FRAME GARNISH
(a) Disengage the clip and remove the door frame garnish.