Venza AWD V6-3.5L (2GR-FE) (2010)
(c) Attach the front door service hole cover according to the reference points on the front door panel.
Text in Illustration
NOTICE:
Securely install the front door service hole cover preventing wrinkles and air bubbles.
(d) Engage the clamp.
(e) Install the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
37. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Front Door Speaker/Installation
38. INSTALL DOOR SIDE AIRBAG SENSOR See: Restraint Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Airbag Sensor (for
Front Side)/Removal
39. INSTALL DOOR FRAME GARNISH
(a) Engage the clip to install a new door frame garnish.
40. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP
(a) Engage the 8 claws and install the front door inner glass weatherstrip to the front door trim board sub-assembly as shown in the illustration.