Venza AWD V6-3.5L (2GR-FE) (2010)
Torque : 90 Nm (918 kgf-cm, 66 ft-lbf)
18. FULLY TIGHTEN REAR NO. 2 BODY MOUNTING BRACKET SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
19. FULLY TIGHTEN REAR SUSPENSION MEMBER
(a) Using SST and a socket wrench (19 mm), fully tighten the 2 nuts.
Text in Illustration
SST : 09961-00950
without SST - Torque : 96 Nm (979 kgf-cm, 71 ft-lbf)
with SST - Torque : 71 Nm (724 kgf-cm, 52 ft-lbf)
NOTICE:
*
Use a torque wrench with a fulcrum length of 425 mm (1.39 ft.).
*
This torque value is effective when SST is parallel to the torque wrench.
HINT
Perform the same procedure for the RH side and LH side.
20. INSTALL FRAME WIRE
(a) Engage the 6 clamps, connect the connector and the hose to install the frame wire.