Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1513003.png)
(c) Slide the rubber boot to engage it as shown in the illustration.
7. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
(b) Install a new clip to the No. 1 parking brake cable assembly.
(c) Depress the parking brake pedal.
(d) Bend the parking brake pedal claw to hold the No. 1 parking brake cable assembly.
