Venza AWD V6-3.5L (2GR-FE) (2010)
Exhaust Manifold: Specifications
EXHAUST MANIFOLD SUB-ASSEMBLY LH
Using a 12 mm deep socket wrench, install the exhaust manifold sub-assembly LH and 6 nuts in the order shown in the illustration.
Torque.......................................................................................................................................................................................21 Nm (214 kgf-cm, 15 ft-lbf)
EXHAUST MANIFOLD SUB-ASSEMBLY RH
Using a 12 mm deep socket wrench, install the exhaust manifold sub-assembly RH by tightening the 6 nuts in the order shown in the illustration.
Torque.......................................................................................................................................................................................21 Nm (214 kgf-cm, 15 ft-lbf)