Venza AWD V6-3.5L (2GR-FE) (2010)
13. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY
(a) Engage the guide and 2 claws to install the No. 3 air duct sub-assembly as shown in the illustration.
14. INSTALL NO. 2 FINISH PANEL MOUNTING BRACKET
(a) Install the No. 2 finish panel mounting bracket with the bolt as shown in the illustration.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
15. INSTALL NO. 1 FINISH PANEL MOUNTING BRACKET
(a) Install the 2 No. 1 finish panel mounting brackets with the 2 bolts as shown in the illustration.