Venza AWD V6-3.5L (2GR-FE) (2010)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Removal
HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
3. REMOVE RADIATOR GRILLE PROTECTOR See: Body and Frame/Grille/Service and Repair/Removal
4. REMOVE RADIATOR GRILLE See: Body and Frame/Grille/Service and Repair/Removal
5. REMOVE AMBIENT TEMPERATURE SENSOR
(a) Disconnect the connector.
(b) Disengage the clamp to remove the ambient temperature sensor.