Venza AWD V6-3.5L (2GR-FE) (2010)
Control Module: Service and Repair
Installation
MF1A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION
1. INSTALL 4WD CONTROL ECU
(a) Install the ECU with the 2 nuts.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect the connector.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
5. INSTALL FRONT DOOR SCUFF PLATE RH