Venza AWD V6-3.5L (2GR-FE) (2010)
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(d) Make sure that the clearance between the seat position sensor and the seat rail is within 0.6 mm (0.0236 in.) to 2.0 mm (0.0787 in.).
(e) Connect the connector.
(f) Check that there is no looseness in the installation parts of the seat position sensor.
2. INSTALL FRONT SEAT ASSEMBLY LH
for Manual Seat: See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual Seat)/Installation
for Power Seat: See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
3. PERFORM DIAGNOSTIC SYSTEM CHECK
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC
Check / Clear.
4. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.