Venza AWD V6-3.5L (2GR-FE) (2010)
Replacement/Installation
13. INSTALL AIR CONDITIONING CONTROL ASSEMBLY See: Heating and Air Conditioning/Control Assembly/Service and
Repair/Installation
14. INSTALL CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
15. INSTALL NO. 2 CONSOLE BOX CARPET See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Installation
17. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
18. INSTALL FRONT SEAT ASSEMBLY LH
HINT
Refer to the instructions for Installation of the front seat assembly.
*
for Manual Seat: See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual
Seat)/Installation
*
for Power Seat: See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
20. INSPECT BRAKE WARNING LIGHT See: Brakes and Traction Control/Parking Brake System/Adjustments