Venza AWD V6-3.5L (2GR-FE) (2010)
Washer Fluid Level Switch: Testing and Inspection
WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSPECTION
1. INSPECT LEVEL WARNING SWITCH ASSEMBLY
HINT
The following check should be performed with the windshield washer motor and pump installed to the washer jar.
(a) Fill the washer jar with washer fluid.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) If the result is not as specified, replace the level warning switch assembly.
Text in Illustration