Venza AWD V6-3.5L (2GR-FE) (2010)
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
7. INSTALL FRONT LOWER SUSPENSION ARM LH See: Control Arm/Service and Repair/Front Lower Suspension Arm/Installation
8. INSTALL FRONT LOWER SUSPENSION ARM RH
HINT
Perform the same procedure as the LH side.
9. TEMPORARILY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
10. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
11. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
12. TEMPORARILY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
13. INSTALL FRONT FRAME ASSEMBLY (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
14. FULLY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
15. FULLY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
16. FULLY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
17. FULLY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
18. TEMPORARILY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
19. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
20. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
21. TEMPORARILY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
22. INSTALL FRONT FRAME ASSEMBLY (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
23. INSTALL REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
24. FULLY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation