Venza AWD V6-3.5L (2GR-FE) (2010)
3. REMOVE FRONT FENDER LINER RH See: Washer Motor (for Front Side)/Removal
4. DRAIN WINDSHIELD WASHER FLUID
(a) Disconnect the washer hose from the rear washer motor and pump assembly, and drain the washer fluid.
HINT
Use a container to collect the washer fluid.
5. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY
(a) Disconnect the connector.
(b) Remove the rear washer motor and pump assembly.
HINT
Use a container to collect the washer fluid.
Installation
WIPER / WASHER: WASHER MOTOR (for Rear Side): INSTALLATION
1. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY
(a) Install the rear washer motor and pump assembly.