Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Remove the 2 screws.
(b) Using a clip remover, disengage the 10 clips.
(c) Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
(d) Raise the front door trim board sub-assembly and remove the front door trim board sub-assembly together with the front door inner glass
weatherstrip.
(e) Disengage the 2 claws and disconnect the front door inside handle sub-assembly.
To Install, reverse Removal procedure