Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2106004.png)
(6) Using a scraper, remove any excess or protruding adhesive.
HINT: Apply adhesive onto the glass rim.
NOTICE: Do not drive the vehicle within the time described in the table below.
Minimum Time:
3. INSPECT FOR LEAK AND REPAIR
(a) After the adhesive has hardened, apply water from the outside of the vehicle. Check that no water leaks into the cabin.
(b) If water leaks into the cabin, allow the water to dry and add adhesive.
(c) Remove the protective tape.
4. INSTALL FRONT PILLAR GARNISH CORNER PIECE (for 6 Speakers) See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
5. INSTALL FRONT PILLAR GARNISH CORNER PIECE (for 13 Speakers) See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
6. INSTALL FRONT PILLAR GARNISH See: Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP See: Interior Moulding / Trim/Headliner/Service and Repair/Installation
