Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2195001.png)
Grille: Service and Repair
Removal
EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL
REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Bumper/Front Bumper/Service and Repair/Removal
2. REMOVE RADIATOR GRILLE PROTECTOR
(a) Remove the 2 radiator grille protectors.
3. REMOVE RADIATOR GRILLE
(a) Put protective tape around the radiator grille.
Text in Illustration
(b) Using a clip remover, remove the 3 clips.
(c) Disengage the 6 claws and remove the radiator grille.
