Venza FWD L4-2.7L (1AR-FE) (2009)
Headliner: Service and Repair
Disassembly
INTERIOR PANELS / TRIM: ROOF HEADLINING: DISASSEMBLY
DISASSEMBLY
1. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof) See: Accessories and Optional Equipment/Antenna/Antenna,
Radio/Antenna Cable/Service and Repair/Removal
2. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof) See: Accessories and Optional Equipment/Antenna/Antenna,
Radio/Antenna Cable/Service and Repair/Removal
3. REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)
(a) Remove the vanity light assembly See: Lighting and Horns/Vanity Lamp/Service and Repair/Removal.
HINT: Use the same procedure for the RH side and the LH side.
4. REMOVE FRONT SIDE RAIL SPACER LH (w/o Sliding Roof)
(a) Remove the front side rail spacer LH.
5. REMOVE FRONT SIDE RAIL SPACER RH (w/o Sliding Roof)
HINT: Use the same procedure for the RH side and the LH side.
6. REMOVE NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)
(a) w/o Rear Seat Entertainment System:
(1) Remove the 3 No. 3 roof silencer pads.
(b) w/ Rear Seat Entertainment System:
(1) Remove the 2 No. 3 roof silencer pads.