Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Engage the 4 claws and install a new visor bracket cover.
14. INSTALL VISOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.
15. INSTALL VISOR BRACKET COVER (for RH Side)
HINT: Use the same procedure for the RH side and the LH side.
16. INSTALL MAP LIGHT ASSEMBLY See: Console/Console Lamp/Service and Repair/Personal Light/Installation
17. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH
(a) Pass the floor anchor of the rear seat outer belt assembly LH through the roof side inner garnish assembly LH.
(b) Insert the upper edge of the roof side inner garnish assembly LH into the roof headlining. Lift the lower edge of the garnish up and push it in
over the 3 stud bolts while ensuring ample clearance.
NOTICE: Do not damage the roof headlining assembly or roof side inner garnish assembly.
(c) Engage the 10 clips to install the roof side inner garnish assembly LH with the bolt.
Text in Illustration
(d) Remove the applied protective tape.
Text in Illustration