Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and
install the front door opening trim weatherstrip LH.
Text in Illustration
NOTICE: After installation, check that the corners fit correctly.
55. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
(a) Engage the 2 clips to install the cowl side trim sub-assembly LH.
(b) Install the clip.
56. INSTALL FRONT DOOR SCUFF PLATE LH
(a) Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.
57. INSTALL UPPER CENTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.
58. INSTALL LOWER CENTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.