Venza FWD L4-2.7L (1AR-FE) (2009)
B. Remove the service hole plug.
C. Insert the tool through the service hole and remove the bolt of the intake VVT gear while holding the camshaft stationary with a wrench.
NOTICE
^
Be careful NOT to damage the cylinder head or spark plug tube with the wrench.
^
Do NOT disassemble the camshaft timing gear.
D. After the VVT gear is slid in the arrow direction as shown in Figure 8 lower the VVT gear and remove the chain from the VVT gear.
E. Remove the VVT gear from the cam housing.