Venza FWD L4-2.7L (1AR-FE) (2009)
Oil Cooler: Service and Repair
Removal
1AR-FE LUBRICATION: ENGINE OIL COOLER: REMOVAL
REMOVAL
1. REMOVE EXHAUST MANIFOLD ASSEMBLY
HINT: See: Exhaust System/Exhaust Manifold/Service and Repair/Removal
2. DRAIN ENGINE OIL See: Engine Oil/Service and Repair/Replacement
3. DRAIN ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
4. REMOVE OIL COOLER ASSEMBLY
(a) Remove the nut, union bolt, seal washer and oil cooler assembly.
(b) Remove the 3 gaskets from the oil cooler assembly.