Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1825003.png)
(a) Install the No. 1 cooler thermistor as shown in the illustration.
Text in Illustration
NOTICE:
-
Be sure to insert the thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
-
When reusing the evaporator, insert the thermistor one row next to the one that has been used previously (X in the illustration).
-
After inserting the thermistor, do not apply excessive force to the wire.
-
Directly insert the thermistor until the edge of plastic case "a" comes into contact with evaporator "b".
7. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY
(a) Engage the 4 claws to install the evaporator insulator as shown in the illustration.
Text in Illustration
