Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2482001.png)
Backup Lamp: Component Tests and General Diagnostics
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT REAR COMBINATION LIGHT ASSEMBLY
(a) Disconnect the connector from the rear combination light assembly.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
LH Side
RH Side
Text in Illustration
If the result is not as specified, repair or replace the wire harness or connector.
