Venza FWD L4-2.7L (1AR-FE) (2009)
License Plate Lamp: Service and Repair
Removal
LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: REMOVAL
REMOVAL
1. REMOVE BACK DOOR PANEL TRIM ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
2. REMOVE REAR WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper Motor/Removal
3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper
Motor/Removal
4. REMOVE REAR WIPER MOTOR GROMMET See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper Motor/Removal
5. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear
Wiper Motor/Removal
6. REMOVE REAR LIGHT ASSEMBLY LH See: Tail Lamp/Service and Repair/Rear Light Assembly/Removal
7. REMOVE REAR LIGHT ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side.
8. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
9. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the 2 claws and remove the license plate light assembly.