Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-978004.png)
(a) Turn the ignition switch off.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- GO TO SHORT TO GND IN CAN BUS LINE
OK -- Continue to next step.
7. CHECK FOR SHORT TO +B IN CAN NO. 1 BUS (CANH, CANL - BAT)
(a) Disconnect the cable from the negative (-) battery terminal.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- GO TO SHORT TO +B IN CAN BUS LINE
OK -- Continue to next step.
8. CHECK INSTALLED SYSTEMS (ECU AND SENSOR) THAT USE CAN COMMUNICATION