Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-981006.png)
3. CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY
Certification ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Certification ECU Communication Stop Mode
Certification ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM