Venza FWD L4-2.7L (1AR-FE) (2009)
HINT:
-
o: Set
-
X: Not set or may be set according to the malfunctioning part when one side of the CAN branch wire opens.
-
*1: DTC is not output during communication error, but will be output as a history DTC (past DTC) when communication returns to
normal.
-
*2: DTC is stored only when both communications are simultaneously interrupted.
-
*3: DTC is not output during communication error.
-
*4: DTC U0100, U0123, U0124 and U0126 are not stored when DTC U0073 has already been stored.
-
Skid Control ECU Communication Stop Mode See: Component Tests and General Diagnostics/Skid Control ECU Communication Stop
Mode
-
Air Conditioning Amplifier Communication Stop Mode See: Component Tests and General Diagnostics/Air Conditioning Amplifier
Communication Stop Mode
-
Power Steering ECU Communication Stop Mode See: Component Tests and General Diagnostics/Power Steering ECU Communication
Stop Mode
-
Steering Angle Sensor Communication Stop Mode See: Component Tests and General Diagnostics/Steering Angle Sensor Communication
Stop Mode
-
Yaw Rate Sensor Communication Stop Mode See: Component Tests and General Diagnostics/Yaw Rate Sensor Communication Stop
Mode
-
ECM Communication Stop Mode See: Component Tests and General Diagnostics/ECM Communication Stop Mode