Venza FWD L4-2.7L (1AR-FE) (2009)
![background image](/toyota/venza_fwd/l4-2.7l_(1ar-fe)/Page-982021.png)
(b) for 2GR-FE engine:
(1) Disconnect the ECM connector (A41).
Text in Illustration
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR OPEN IN CAN BUS WIRE (COMBINATION METER)
B -- REPLACE ECM
A -- REPLACE ECM
3. CHECK FOR OPEN IN CAN BUS WIRE (COMBINATION METER)
(a) Reconnect the ECM connector.
(b) Disconnect the combination meter connector (E1).